GA&DA NT3 630A, eslabón fusible de baja tensión, 500 V, IEC 60269

NT3 630A Fuse Link Overview

El GA&DA NT3 630A fuse link is designed for high-current protection in low-voltage power distribution systems. It provides overload and short-circuit protection for circuits where dependable fault interruption is required.

The product marking identifies the fuse as an NT3 630A gG/gL fuse link with a rated voltage of 500 V and a breaking capacity of 120 kA. It is manufactured for applications covered by IEC 60269, making it suitable for use in industrial switchboards, distribution cabinets, machinery and electrical power systems.

Unlike smaller fuse links intended for branch circuits or lighter loads, the NT3 630A model is intended for circuits carrying significantly higher current. It is therefore commonly considered for main feeders, industrial distribution equipment and heavy-duty electrical installations.

Its standardized NT3 construction allows it to be used with compatible fuse bases, fuse switches and low-voltage switchgear.

Características del producto

630A High-Current Protection

The rated current of 630A makes this fuse suitable for high-load low-voltage circuits. It can be used where smaller fuse sizes do not provide sufficient current-carrying capability.

gG/gL Full-Range Protection

El cuerpo del fusible lleva una marca gG/gL, indicating general-purpose full-range protection.

This operating class is commonly used to protect:

• Cables and conductors
• Distribution feeders
• Electrical equipment
• Power circuits
• Industrial wiring systems

The fuse is designed to respond to both overload conditions and high short-circuit currents within its specified operating characteristics.

High Breaking Capacity

A breaking capacity of 120 kA allows the fuse to interrupt high prospective fault currents. This is especially important in industrial installations where short-circuit levels can be significantly higher than in small commercial or residential systems.

Standardized NT3 Format

The NT3 form factor provides compatibility with suitable NT3 fuse bases and fuse switching equipment. This helps panel builders and maintenance teams use standardized protection components in low-voltage assemblies.

Durable Fuse Construction

The product uses a rigid insulating body together with metal blade contacts. This structure is designed to withstand the thermal and electrical stresses associated with high-current fuse operation.

Especificaciones técnicas

Typical Applications

The NT3 630A fuse link is intended for applications where high current capacity and reliable circuit isolation are required.

Typical installations include:

• Main low-voltage distribution boards
• Industrial switchboards
• Power distribution cabinets
• Factory electrical systems
• High-current feeder circuits
• Maquinaria industrial
• Motor control and distribution systems
• Transformer secondary circuits
• OEM electrical equipment
• Commercial and industrial power systems

For maintenance applications, replaceable fuse links also allow damaged or operated protection devices to be replaced without replacing the entire switching assembly.

Selection Considerations

When selecting an NT3 630A fuse link, the rated current alone should not be used as the only selection factor.

Engineers and buyers should also confirm:

• System operating voltage
• Expected load current
• Prospective short-circuit current
• Required fuse operating class
• Compatible fuse base or fuse switch
• Cable and conductor ratings
• Coordination with upstream and downstream protection devices

The 630A fuse should only be selected when the connected conductors and equipment are designed for the corresponding current level.

For applications involving motors, transformers or equipment with high starting currents, protection coordination should also be considered to reduce unnecessary fuse operation during normal transient conditions.

Benefits for Distributors and Panel Builders

The NT3 630A model is suitable for distributors, switchgear manufacturers, electrical contractors and OEM customers sourcing standardized low-voltage protection components.

Key purchasing advantages include:

• Clear product and current identification
• Standard NT3 configuration
• High-current 630A rating
• gG/gL general-purpose protection
• Suitable for industrial distribution equipment
• Compatible with corresponding fuse mounting systems
• Bulk order availability
• Support for OEM and project procurement

GA&DA can support customers requiring fuse links for stock supply, panel assembly or industrial projects. Buyers can provide the required model, quantity and application information when requesting a quotation.

Preguntas frecuentes

Solicitar presupuesto