الوصف

GDSM-125-4P Automatic Transfer Switch Overview

الـ GDSM-125-4P automatic transfer switch is a moulded-case dual power transfer switch designed for AC power systems requiring controlled changeover between normal and standby power sources. As a CB-class automatic transfer switch, it combines dual-power switching with a robust moulded-case structure suitable for commercial, industrial and equipment-control applications.

The GDSM-125-4P uses a 125A shell frame and provides rated current options of 25A, 32A, 40A, 50A, 63A, 80A, 100A and 125A. The 4-pole configuration allows switching of three phase conductors together with the neutral conductor, making it suitable for three-phase four-wire electrical systems.

Rated operating voltage is AC400V 50Hz, while the rated insulation voltage reaches AC800V. An 8kV impulse withstand voltage provides additional insulation capability for demanding low-voltage distribution environments.

الـ GDSM-125-4P automatic transfer switch supports both automatic and manual operation. Front-panel indicators provide visual information for power and switch operating states, helping installers and maintenance personnel identify the status of normal and standby sources.

With a rated switching time of approximately 0.3 seconds, the GDSM-125-4P provides fast changeover for applications where continued electrical supply is important.

المواصفات الفنية

التطبيقات

الـ GDSM-125-4P automatic transfer switch is suitable for dual-power installations requiring higher current capacity and four-pole switching.

تشمل التطبيقات النموذجية ما يلي:

• Commercial building distribution systems
• Industrial control panels
• Factory power distribution
• Generator and mains changeover
• Emergency power systems
• HVAC power supply systems
• Data and communication equipment rooms
• Machinery power control
• OEM electrical cabinets
• Three-phase four-wire distribution systems

Its 125A frame and CB-class construction make it particularly suitable for installations requiring a more substantial transfer-switch structure than compact modular ATS products.

Why Choose GA&DA GDSM-125-4P?

الـ GDSM-125-4P automatic transfer switch combines high-current dual-power switching with a moulded-case CB-class design.

ومن بين المزايا الرئيسية ما يلي:

• 25A–125A rated current range
• 4-pole switching
• AC400V operating voltage
• AC800V insulation voltage
• 8kV impulse withstand voltage
• AC-33iB utilization category
• Automatic and manual control
• 0.3s switching time
• IP30 protection level
• Clear operating status indication
• 6000-operation life
• Suitable for OEM and project purchasing

For panel builders, electrical contractors and industrial distributors, the GDSM-125-4P provides a practical dual-power switching solution for medium-capacity three-phase systems.

الأسئلة الشائعة

طلب عرض أسعار